Skelda Solutions | PFP Pipe closer

PFP cuff used for sealing round plastic pipes

CE marked
Swelling at 105° C, expansion time normally below 2 minutes
Tubes from dimension 32 mm to 315 mm (series for standard dimensions)
PVC-U, PVC-C, PE, LDPE, MDPE, HDPE, ABS, SAN+PVC and PP pipes.
Splitable for easy assembly
Fire rating up to EI 240 depending on the fire rating of the building structure
Plaster, brick or concrete walls and floors
Mounted outside the wall around pipes or floor

Product availability

Product code	Product description	Size	Minimum wall thickness mm	Segment length etc.
AFPFPPC32	PFP FIREMAN'S CAP: 32MM (DEPTH 50MM)	32MM	75	30
AFPFPPC40	PFP FIREMAN'S CAP: 40MM (DEPTH 50MM)	40MM	75	42,4
AFPFPPC55	PFP FIREMAN'S CAP: 55MM (DEPTH 50MM)	55MM	75	25,1
AFPFPPC63	PFP FIREMAN'S CAP: 63MM (DEPTH 50MM)	63MM	100	40
AFPFPPC75	PFP FIREMAN'S CAP: 75MM (DEPTH 50MM)	75MM	100	57,1
AFPFPPC82	PFP FIREMAN'S CAP: 82MM (DEPTH 50MM)	82MM	100	38,4
AFPFPPC90	PFP FIREMAN'S CAP: 90MM (DEPTH 50MM)	90MM	120	79,4
AFPFPPC110	PFP FIREMAN'S CAP: 110MM (DEPTH 50MM)	110MM	120	41,4
AFPFPPC125	PFP FIREMAN'S CAP: 125MM (DEPTH 60MM)	125MM	120	55,1
AFPFPPC140	PFP FIREMAN'S CAP: 140MM (DEPTH 60MM)	140MM	140	93,1
AFPFPPC160	PFP FIREMAN'S CAP: 160MM (DEPTH 60MM)	160MM	140	67,6
AFPFPPC200	PFP FIREMAN'S CAP: 200MM (DEPTH 60MM)	200MM	140	93,1
AFPFPPC250	PFP FIREMAN'S CAP: 250MM (DEPTH 75MM)	250MM	140	99
AFPFPPC315	PFP FIREMAN'S CAP: 315MM (DEPTH 75MM)	315MM	140	68,3

Assembly instructions

For sealing penetrations in floors, a sleeve is fitted on the underside or top of the floor. For sealing walls, cuffs are fitted on both sides of the wall.
Prior to installation, any gaps between the wall and pipe must be sealed with PFP Acrylic Sealant. In plaster, brick and concrete wall, where the gap is less than 8mm, it is sealed with a bead of PFP sealant. In plaster wall if the gap is greater than 8mm, it must be filled with 25mm thick PFP joint into the wall. In brick and concrete wall where the gap is greater than 8 mm, it is first sealed with 20 mm drive strip of mineral wool 20 mm into the wall, then the remaining gap is filled with 20 mm deep PFP joint. In floors, gaps less than 10 mm must be filled with PFP FRAkrylfog 20 mm mineral wool drive strip. Where the gap between the floor and the pipe is greater than 10 mm, first seal with 40 mm mineral wool drive strip 10 mm into the structure, and then with 10 mm PFP joint. When the gap is over 30 mm, we recommend using PFP Board for filling. See separate product sheet.
Wrap the sleeve around the pipe or cable bundle and ensure that it is flush with the wall or floor so that it can be screwed tightly to the structure.
If the wall surface is uneven, fill in with PFP Acrylic Sealant between the cuff and the wall or floor.
Use steel screws for installation. Drywall or concrete anchors can be used if necessary. For drywall, use minimum Ø4 mm steel screw with length suitable for the number of boards the wall is made of. Alternatively, use M5 drywall anchors for single or double drywall. If concrete anchors/expander bolts are used, the length should be at least 40 mm.
In situations where the penetration hole is larger than the plastic pipe, and/or the pipe enters the structure at an angle, an oversized collar can be used. PFP Pipe closer is tested to seal even when the diameter of the pipe is smaller than the inner diameter of the collar. Note that the gap between the pipe and the structure must never be larger than 55 mm!

‍

Number of clamping hooks required for the pipes
110-315	8 UNITS
355-560	10 UNITS
630-710	12 UNITS
800-1000	16 UNITS

Frequently asked questions about sealings

How much load can the sealings generally withstand?

It is important to note that the sealings are not intended to act as supports. The pipes must be supported on both sides of the seal.

Which sealings can withstand axial movements?

W801, W803 and W804 are all tested for generous axial movements.

Do your sealings protect against both radon and water?

Many of our sealings protect against both radon and water. You can see from the labels on the products which ones protect against what.

Where can I find more data sheets for other products?

Here is a link to all the data sheets we have: Data sheets

How big sealings can you deliver?

We have sealings in stock with a diameter of up to 1000 mm. We have the ability to build custom sealings and have supplied sealings up to 2000 mm diameter, but there are no limits to how large sealings we can make.

Call or email us to discuss your sealings needs in more detail. 033-10 04 40 or info@skelda.se

Does W802 work on corrugated pipes?

It is possible to install W802 on corrugated pipes provided that it lies on one or more of the tops of the pipe. Should there be very wide gaps on large pipes, it may be necessary to seal the gap in the corrugation before installing the seal.

Do you have any radon sealing that is Nordic Swan Ecolabeled?

W802 is included in the House Product Portal and is therefore approved for Nordic Swan Ecolabel projects. These types of sealings cannot be Nordic Swan Ecolabeled and this also applies to competitors' products. But if they are included in the House Product Portal, it works.

Which sealings are approved for radon?

W801, W802, Link Seal, Compact and Nofirno are all approved radon sealings.

Water and radon sealings

Fire sealing

Other products

PFP Pipe closer

PFP cuff used for sealing round plastic pipes

Product availability

Assembly instructions

Frequently asked questions about sealings

Tailored to your needs