Fire sealing

Fire protection tape

Pipe Wrap PFP

PFP intumescent fire protection tape is used for sealing around plastic pipes
Pipe Wrap PFP

More information

  • CE marked, approval ETAG 026-2
  • Swells at 150° C, expansion time normally under 10 minutes
  • For pipes in dimension 50mm up to 315 mm (series for standard dimensions)
  • For pipes made of PVC-U, PVC-C, PE, LDPE, MDPE, HDPE, ABS, SAN+PVC and PP.
  • Self-adhesive bag for easy installation
  • Provides a fire rating up to EI 240 depending on the fire rating of the building structure
  • For installation in fire protection mortar, board, concrete or brick.
  • Mounted inside the wall around pipes

Product availability


PROD CODE

SIZE

INTENDED USE

AFPFPW55

PFP FR FIRE TAPE 55MM

PLASTIC PIPES AND TUBES ≤ Ø55MM

AFPFPW82

PFP FR FIRE TAPE 82MM

PLASTIC PIPES AND TUBES ≤ Ø82MM

AFPFPW110

PFP FR FIRE TAPE 110MM

PLASTIC PIPES AND TUBES ≤ Ø110MM

AFPFPW125

PFP FR FIRE TAPE 125MM

PLASTIC PIPES AND TUBES ≤ Ø125MM

AFPFPW160

PFP FR FIRE TAPE 160MM

PLASTIC PIPES AND TUBES ≤ Ø160MM

AFPFPW200

PFP FR FIRE TAPE 200MM

PLASTIC PIPES AND TUBES ≤ Ø200MM

AFPFPW250

PFP FR FIRE TAPE 250MM

PLASTIC PIPES AND TUBES ≤ Ø250MM

AFPFPW315

PFP FR FIRE TAPE 315MM

PLASTIC PIPES AND TUBES ≤ Ø315MM

Frequently asked questions about sealings

It is important to note that the sealings are not intended to act as supports. The pipes must be supported on both sides of the seal.

W801, W803 and W804 are all tested for generous axial movements.

Many of our sealings protect against both radon and water. You can see from the labels on the products which ones protect against what.

Here is a link to all the data sheets we have: Data sheets

We have sealings in stock with a diameter of up to 1000 mm. We have the ability to build custom sealings and have supplied sealings up to 2000 mm diameter, but there are no limits to how large sealings we can make.

Call or email us to discuss your sealings needs in more detail. 033-10 04 40 or info@skelda.se

It is possible to install W802 on corrugated pipes provided that it lies on one or more of the tops of the pipe. Should there be very wide gaps on large pipes, it may be necessary to seal the gap in the corrugation before installing the seal.

W802 is included in the House Product Portal and is therefore approved for Nordic Swan Ecolabel projects. These types of sealings cannot be Nordic Swan Ecolabeled and this also applies to competitors' products. But if they are included in the House Product Portal, it works.

W801, W802, Link Seal, Compact and Nofirno are all approved radon sealings.